• AES
  • AES

AESTX Series Parameters

TX series

AES introduces the flexible and efficient TX series of power amplifiers. The TX series adopts a standard 19-inch rack width, 2U 9-inch chassis design, small size, light weight, and easy installation. The circuit adopts ClassD power amplifier module and reliable and efficient R-SMPS regulated power supply system, and integrates an active power factor correction circuit (PFC). PFC makes the TX series power amplifier more efficient and controllable, and can be adjusted according to the AC voltage waveform Current waveforms to accommodate wide voltage operation worldwide, while enabling a single standard circuit breaker to carry higher power.

feature

  • Class D amplifier module.
  • R-SMPS.
  • Separate channels on the front panel have temperature, protection and peak clipping warning lights.
  • Independent channel power indicator and -5dB / -10dB / -20dB signal indicator on the front panel.
  • The rear panel has input sensitivity selection (32dB/1V/0.775V).
  • The rear panel has connection mode selection (Stereo/Bridge/Parallel).
  • Rear panel XLR input sockets and link sockets.
  • The SpeakON NI4 output socket on the rear panel.

Parameter

Model TX1200 TX2400 TX3600
Power (output power per channel with resistive load at the same time under the stable power supply condition of 220V~50Hz THD=1
8Ω Stereo Power 500W ×2* 700W ×2* 1000W ×2*
4Ω Stereo Power 850W ×2** 1250W ×2** 1750W ×2**
2Ω Stereo Power 1250W ×2** 1600W ×2** 2250W ×2**
8Ω Bridge Power 1700W** 2500W** 3500W**
4Ω bridge power 2500W** 3200W** 4500W**
Other parameters
Frequency Response 20Hz-20KHz (+0/-1dB)
Total Harmonic Distortion ≤0.15% ≤0.15% ≤0.15%
Signal to Noise Ratio ≥100dB ≥100dB ≥100dB
Input Sensitivity 0.775V /1V/ 32dB 0.775V /1V/ 32dB 0.775V /1V/ 32dB
Input impedance (balanced/unbalanced) 20kΩ/10kΩ 20kΩ/10kΩ 20kΩ/10kΩ
Voltage Gain (8 ohms) 38.2dB 39.7dB 41.2dB
Output Category Class D Class D Class D
Cooling Exhaust from front to back Exhaust from front to back Exhaust from front to back
Dimensions/Weights
Product Dimensions (mm) 483 × 305.5 × 89 483 × 305.5 × 89 483 × 305.5 × 89
Outer Packaging Dimensions (mm) 560 x 435 x 170 560 x 435 x 170 560 x 435 x 170
Gross Weight 8.1kg 8.5kg 9.1kg

Notice:
1. This power is measured in accordance with EIA standards.
2. *, this power is measured using a 40ms pulse 1kHz sine wave at 1% total harmonic distortion.
3.**, this power is measured using a 20ms pulse 1kHz sine wave at 1% total harmonic distortion.
4. AES reserves the right to interpret the above parameters. The parameters will change without further notice. The final parameters are subject to the product manual.