• AES
  • AES
  • AES
  • AES

AESTXQ series parameters

TXQ series

TXQ series is the best choice for those places that need multi-channel amplifiers for sound reinforcement. It can provide excellent sound quality and high-density power output under the premise of taking into account the economy. The TXQ series adopts Class D power amplification technology and has PFC function (Power Factor Correction), which can perfectly work under the world voltage (90V-260V). The TXQ series power amplifier integrates the functional requirements of most sound reinforcement applications.

feature

  • Class D amplifier module.
  • SMPS Universal Voltage.
  • Independent channel power indicator and -5dB / -10dB / -20dB signal indicator on the front panel.
  • The rear panel has input sensitivity selection (32dB/1V/0.775V).
  • The rear panel has connection mode selection (Stereo/Bridge/Parallel).
  • Rear panel XLR input sockets and link sockets.
  • The SpeakON NI4 output socket on the rear panel.

Parameter

Model TX300Q TX500Q TX800Q TX1000Q
Power (output power of each channel with resistive load at the same time under the stable and stable frequency power supply condition of 220V~50Hz THD=1)
8Ω Stereo Power 300W x4* 500W x4* 800W x4* 1000W x4*
4Ω Stereo Power 500W x4** 750W x4** 1500W x4* 1600W x4**
2Ω Stereo Power 750W x4** 950W x4** 1500W x4* 1300W x4*
8Ω bridge power 1000W x2** 1500W x2** 2800W x2* 3000W x2*
4Ω bridge power 1000W x2** 1500W x2** 2800W x2* 3000W x2*
Other parameters
Frequency Response 20Hz-20kHz( +0/-1dB) 20Hz-20kHz( +0/-1dB)
Total Harmonic Distortion ≤0.1% ≤0.2%
Signal to Noise Ratio ≥ 100dB ≥ 98dB
Input Sensitivity 0.775V/1V/32db 0.775V/1V/32db
Input impedance (balanced/unbalanced) 20kΩ/10kΩ 20kΩ/10kΩ
Voltage Gain (8 ohms) 36dB 38.2dB 40.3dB 41.2dB
Size/Weight
Product Dimensions (mm) 483 x 435 x 89 483 x 435 x 89 483 x 435 x 89 483 x 435 x 89
Outer Packaging Dimensions (mm) 595 x 565 x 170 595 x 565 x 170 595 x 565 x 170 595 x 565 x 170
Gross Weight 10.7kg 11kg 12.1kg 12.5kg

Notice:
1. This power is measured in accordance with EIA standards.
2, *, this power is measured using a 40ms pulse 1kHz sine wave at 1% total harmonic distortion.
3.**, this power is measured using a 20ms pulse 1kHz sine wave at 1% total harmonic distortion.
4. AES reserves the right to interpret the above parameters. The parameters will change without further notice. The final parameters are subject to the product manual.